beaglebone-black - Flipbook - Page 87
BeagleBone Black
Bit 3 PULLUP/DN 0=Pullup/pulldown enabled 1= Pullup/pulldown disabled
Bit 2-0 MUX MODE SELECT Mode 0-7. (refer to TRM)
Refer to the TRM for proper settings of the pin MUX mode based on the signal selection to be used.
The AIN0-6 pins do not have a pin mux setting, but they need to be set to indicate if each of the pins is used
on the cape. Only bit 15 is used for the AIN signals.
82
Chapter 8. Cape Board Support
