beaglebone-black - Flipbook - Page 26
BeagleBone Black
Table 4.1: BeagleBone Black Features
Feature
Processor
Graphics Engine
SDRAM Memory
Onboard Flash
PMIC
Debug Support
Power Source
PCB
Indicators
HS
USB
2.0
Client Port
HS USB 2.0 Host
Port
Serial Port
Ethernet
SD/MMC Connector
User Input
Video Out
Audio
Expansion
nectors
Weight
Power
Sitara AM3358BZCZ100 1GHz, 2000 MIPS
SGX530 3D, 20M Polygons/S
512MB DDR3L 800MHZ
4GB, 8bit Embedded MMC
TPS65217C PMIC regulator and one additional LDO.
Optional Onboard 20-pin CTI JTAG, Serial Header
miniUSB USB or DC Jack
3.4” x 2.1”
1-Power, 2-Ethernet, 4-User Controllable LEDs
Access to USB0, Client mode via miniUSB
Access to USB1, Type A Socket, 500mA LS/FS/HS
UART0 access via 6 pin 3.3V TTL Header. Header is populated
10/100, RJ45
microSD , 3.3V
1. Reset Button
2. Boot Button
3. Power Button
1. 16b HDMI, 1280x1024 (MAX)
2. 1024x768,1280x720,1440x900 ,1920x1080@24Hz w/EDID Support
Con-
Via HDMI Interface, Stereo
1. Power 5V, 3.3V , VDD_ADC(1.8V)
2. 3.3V I/O on all signals
3. McASP0, SPI1, I2C, GPIO(69 max), LCD, GPMC, MMC1, MMC2, 7
4. AIN _(1.8V MAX)_, 4 Timers, 4 Serial Ports, CAN0,
5. EHRPWM(0,2),XDMA Interrupt, Power button, Expansion Board ID (Up to 4 can
be stacked)
1.4 oz (39.68 grams)
Refer to section-6-1-7
4.3 Board Component Locations
This section describes the key components on the board. It provides information on their location and function.
Familiarize yourself with the various components on the board.
4.3.1 Connectors, LEDs, and Switches
昀椀gure below shows the locations of the connectors, LEDs, and switches on the PCB layout of the board.
• DC Power is the main DC input that accepts 5V power.
• Power Button alerts the processor to initiate the power down sequence and is used to power down the
board.
• 10/100 Ethernet is the connection to the LAN.
4.3. Board Component Locations
21
