beaglebone-black - Flipbook - Page 11
BeagleBone Black
Rev
A5.5
A5.6
A5.7
A6
A6A
B
Changes
Table 2.1 – continued from previous page
1. Release of the A5B version.
2. The LEDs were dimmed by changing the resistors.
3. The serial termination mode was incorporated into the
PCB.
1. Added information on Rev A5C
2. Added PRU/ICSS options to tables for P8 and P9.
3. Added section on USB Host Correct modes on «table-15».
4. Fixed a few typos
1. Updated assembly revision to A6.
2. PCB change to add bu昀昀er to the reset line and ground the
oscillator GND pin.
3. Added resistor on PCB for connection of OSC_GND to
board GND.
1. Added Rev A6 changes.
1. Added Rev A6A changes
1. Changed the processor to the AM3358BZCZ
C
1. Changed the eMMC from 2GB to 4GB.
2. Added additional supplier to DDR2 and eMMC.
C.1
C.2
C.3
1. Added note to recommend powering o昀昀 the board with
the power
Numerous community edits and format changes to asciidoc.
Added information for board rev C3.
Date
By
May 20, 2013
GC
June 16, 2013
GC
August 9, 2013
GC
October 11, 2013
GC
December 17, 2013
GC
January 20, 2013
GC
March 21,2014
GC
March 22, 2014
GC
May 6, 2020
August 24, 2021
JK
JK
2.2 Board Changes
2.2.1 Rev C3a
PCB revision C.
• New USB Type-A connector.
2.2.2 Rev C3
PCB revision C.
• Updated microSD card cage due to availability.
See https://git.beagleboard.org/beagleboard/
beaglebone-black/-/issues/6. Added series resistors and depopulated C5.
6
Chapter 2. Change History
